go9x9.jpg
Vcarve-Go.png
go9x9.jpg
Vcarve-Go.png

Go Board (9x9) (CNC File)

$2.00

CNC File for a small 9x9 Go Board. Only uses a V-bit. The V-carve file is setup fora 1/4” - 60 degree V bit.

My son wanted to learn GO, so I made us a small 9x9 board for us to learn on. For mine I used a walnut slab cutoff.

Note: Download consists of a zip file with a single Vectric V-Carve (crv) file (v11).

Add To Cart

CNC File for a small 9x9 Go Board. Only uses a V-bit. The V-carve file is setup fora 1/4” - 60 degree V bit.

My son wanted to learn GO, so I made us a small 9x9 board for us to learn on. For mine I used a walnut slab cutoff.

Note: Download consists of a zip file with a single Vectric V-Carve (crv) file (v11).

CNC File for a small 9x9 Go Board. Only uses a V-bit. The V-carve file is setup fora 1/4” - 60 degree V bit.

My son wanted to learn GO, so I made us a small 9x9 board for us to learn on. For mine I used a walnut slab cutoff.

Note: Download consists of a zip file with a single Vectric V-Carve (crv) file (v11).

You Might Also Like

French Cleat Shelf (CNC Files)
$3.00